Find the user manual you need for your home appliance products and more at ManualsOnline. Automotive; Baby Care; Car Audio & Video. Honeywell 63500 Air Cleaner User Manual. Of 8 Portable Air. READ AND SAVE THESE INSTRUCTIONS. Owner's Guide. For Model Series. 61500. 62500. 63500. 64500 Series Air Cleaners. Need to fix your 13520 Air Purifier Filter? Use our part lists, interactive diagrams, accessories and expert repair advice to make your repairs easy. Repair Parts Home HVAC Parts Honeywell Parts Honeywell Air Purifier Parts Honeywell 13520 Air Purifier Filter Parts. We Sell Only Genuine Honeywell ® Parts. Honeywell 13520 Air Purifier. Honeywell HEPA Filter # 28725: Secure, online ordering, and to-your-door-delivery - it's a snap to order this genuine Honeywell 28725 HEPA filter. HEPA filter is 99.97% effective at removing particles as small as.3 microns from the air that passes through the filter. Recommended replacement is every 1 to 3 years. Click here for owner's manuals.

HE365A,B POWERED FLOW-THROUGH HUMIDIFIER

68-0243

4

Fig. 5. Position securing clips.

7. Position the humidifier housing in the hole (be sure it is

level), so the locking tabs are in place on the upper and
lower sheet metal edges of the hole.

8. Push in the securing clips until completely seated.
9. Drill holes and install the three sheet metal screws at

the top of the humidifier housing. Secure the housing
with the three remaining screws at the bottom of the
housing.

10. Reinstall the humidifier pad assembly in the humidifier

housing.

IMPORTANT

For proper operation, be sure the mark on the end of
the humidifier pad is facing up. Check that the water
feed tube is placed in the guide slots of the
humidifier housing.

11. Hook the top of the cover to the housing and secure

with the thumbscrew located at the bottom of the cover.

WIRING HUMIDIFIER

WARNING

Serious Personal Injury or Equipment Hazard.
Moving parts can cause electrical shock and
injury.
•

Disconnect power supply before installation or
servicing.

•

This device contains a moving fan blade; do not
operate the humidifier without the cover securely
attached.

All wiring must comply with applicable local codes,
ordinances and regulations.

For H8908B Convertible Humidity Control Wiring
Connections:

IMPORTANT

•

Select models of fan centers include humidifier taps so
the current sensing relay or sail switch is not needed.

•

If not using a current sensing relay or sail switch, the
120V humidifier plug must be energized during blower
motor cycles for proper operation.

1. Wire the current sensing relay or sail switch.

M12813

CLIP

CLIP

HUMIDIFIER

MECHANICAL
HUMIDISTAT

120 VAC

TO BLOWER
MOTOR
IGNITION BOX

M12686

YELLOW WIRES

1

1

2

2

POWER SUPPLY. PROVIDE DISCONNECT MEANS AND
OVERLOAD PROTECTION AS REQUIRED.

24V WIRING.

CURRENT
SENSING
RELAY

HUMIDIFIER

120 VAC

BLOWER
MOTOR

C

LO

HI

M12684

YELLOW WIRES

1

1

2

2

POWER SUPPLY.
PROVIDE DISCONNECT
MEANS AND OVERLOAD
PROTECTION AS REQUIRED.

24V WIRING.

MECHANICAL
HUMIDISTAT

2. Connect only the two yellow wires to the humidity

control (red wire connections are not used for
mechanical humidity control). See the typical wiring
diagrams in Fig. 6 through 8.

For additional mounting and wiring information, refer to the
humidity control installation instructions.

For H1008 Automatic Humidity Control Wiring
Connections:

IMPORTANT

Current sensing relay or sail switch is not needed
with the Automatic Humidity Control.

1. Connect the two red and two yellow wires to the

electronic humidity control as shown in Fig. 9.

For additional mounting and wiring information, refer to the
humidity control installation instructions.

Fig. 6. Typical wiring diagram for humidifier using fan

control to cycle blower motor fan and humidifier

simultaneously.

Fig. 7. Typical wiring diagram of current sensing relay

with humidifier.

Portable HEPA

Air Cleaner

READ AND SAVE THESE INSTRUCTIONS

Owner’s Guide

For Model 51130 Series Air Cleaner

PLEASE READ AND SAVE THESE SAFETY INSTRUCTIONS BEFORE USING THIS AIR CLEANER.

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:

1.Read all instructions before operating the air cleaner.

2.Place air cleaner where it is not easily knocked over by persons in the household.

3.Always turn the air cleaner to the OFF position and unplug when not in use.

4.To disconnect the air cleaner, first turn speed control to OFF position, grip the plug and pull it from the outlet. Never pull by the cord.

5.Do not use any product with a damaged cord or plug or if product malfunctions, is dropped or damaged in any manner. Keep the cord away from the heated surfaces.

6.Do not use air cleaner outdoors.

7.Never use air cleaner unless it is fully assembled.

Honeywell Enviracaire True Hepa Filtration

8.Do not run power cord under carpets, and do not cover with throw rugs. Arrange cord such that it will not be tripped over.

9.Do not use air cleaner where combustible gases or vapors are present.

10.Do not expose the air cleaner to rain, or use near water, in a bathroom, laundry area or other damp location.

11. The air cleaner must be used in its upright position.

12.Do not allow foreign objects to enter ventilation or exhaust opening as this may cause electric shock or damage to the air cleaner. Do not block air outlets or intakes.

13.Locate air cleaner near power outlet and avoid using an extension cord.

14.The air cleaner has a polarized plug (one blade is wider than the other). To reduce risk of shock, this plug is intended to fit only one way in a polarized outlet. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat this safety feature.

15.A loose fit between the AC outlet (receptacle) and plug may cause overheating and a distortion of the plug. Contact a qualified electrician to replace loose or worn outlet.

16.Do not sit, stand or place heavy objects on the air cleaner.

17. Disconnect power supply before servicing.

WARNING: To Reduce The Risk of Fire or Electric Shock, Do Not Use This Air Cleaner With Any Solid-State Speed Control Device.

Congratulations

You now own a quality portable HEPA air cleaner that has been engineered and crafted for your satisfaction.

Our Consumer Relations representatives will be pleased to help with any questions or concerns you may have about your Honeywell air cleaner. Please call our Consumer Relations Dept. at (800) 332-1110 for assistance.

For Best Performance

We recommend that you operate your Honeywell air cleaner 24 hours a day because indoor air can be quickly contaminated by activity in a room and infiltration of outside air. While all the air in a room will not be processed by the air cleaner, the more air circulated through the filter, the more filtered air returned to the room. Portable air cleaners will be much more effective in rooms where all doors and windows are closed.

The Honeywell HEPA air cleaner is ready to begin cleaning air as soon as it is removed from the carton and plugged in. Because it circulates air in a 360 degree pattern around the air cleaner, it can be placed on the floor in almost any location. However, for best performance the air outlet slot should not be blocked for at least 1 meter (three feet) in all directions.

Due to the large volume of air drawn towards the air cleaner, surrounding areas should be cleaned and/or vacuumed frequently to prevent buildup. This may help keep your home cleaner and may extend the life of your pre-filter. If the unit is placed on light colored carpeting, a small mat or rug should be used to ease cleaning and prevent any permanent staining. This is particularly important in homes with heavier contamination from smoking or fireplaces.

Model 51130 Series

The Honeywell 51130 air cleaner is a 3 speed air cleaner operated by moving the speed control knob on the top cover from the “OFF” position to the “super” position. Allow the unit to operate for a few seconds at “super”, then leave the control knob in the “super” position for faster, powerful room cleaning, or move the knob to a lower setting for quieter operation.

Features

The Ionizer charges particles in the air which may enhance the air cleaner’s performance.

Replacement Filters

Replacement filters may be purchased from the retail store or ordered from the dealer where you purchased the product. If you cannot locate one, please call our Consumer Relations Dept. at (800) 332-1110 or e-mail us at: service@honeywell.com.

Operation

Step 1: Inspect Air Cleaner upon removal from its container. Remove and discard any packaging material.

Step 2: Place the air cleaner on a flat, level, unobstructed surface. IF USING THE

IONIZER, DO NOT PLACE THE AIR CLEANER WITHIN THREE FEET OF ANY COMPUTER OR MAGNETICALLY SENSITIVE DEVICES SUCH AS FLOPPY DISKS OR TAPES.

Step 3: Make sure that speed control is set to the OFF position. Plug in air cleaner.

Step 4: Set speed control to the “super” position. Allow the unit to operate for a few minutes at “super”, then leave the control knobs in the “super” position for faster, more powerful room cleaning, or move the knob to a lower setting for quieter operation. Set Ionizer control to desired setting, O (Ionizer OFF) or I (Ionizer ON).

How to Change the Filters

CAUTION: DISCONNECT FROM POWER SUPPLY BEFORE SERVICING

The only two parts requiring any service are the activated carbon pre-filter and the HEPA filter. No tools are needed. To change either filter, disassemble the unit as described below.

NOTE: Neither the pre-filter nor the HEPA filter are washable.

Step 1: Turn the Air Cleaner off and unplug from the wall outlet.

Step 2: To open, gently place the air cleaner on its side and unscrew the locking handle counter-clockwise to release the BASE from the air cleaner.

Step 3: Remove the BASE.

Step 4: Remove the filter assembly (consisting of the HEPA and pre-filter) from the internal chamber.

Step 5: Locate the seam of the pre-filter and carefully separate the fastener on the seam from the pre-filter and remove the pre-filter from the HEPA filter.

Step 6: Discard used filter(s) being replaced. Remove any packaging and plastic from replacement filter(s). If applicable, see pre-filter sizing instructions included inside the Universal Pre-filter box

(model 38002).

Step 7: Carefully wrap the pre-filter around the HEPA filter so that the ends meet. Fasten the ends together with the strap fastener.

Step 8: Place the whole filter assembly into the product chamber.

Close the product by replacing the base and tightening the locking handle.

Step 2

Step 5

Step 7

NOTE: The HEPA filter assembly was designed to easily fit into the power head without any orientation; there is no top or bottom to the HEPA filter.

Step 9: Turn the air cleaner upright, plug into wall socket and turn on.

Filter Replacement Reminders

Filter Change Schedule: Pre-filter: Replace every 3 months

HEPA filter: Replace every 1-3 years depending on use

Upon start up of your air cleaner and upon every pre-filter replacement, roll the Pre-filter Change Calendar ahead 3 months to indicate when the next filter replacement is necessary (Fig. 1).

Upon start up of your air cleaner and upon every HEPA filter replacement, roll the HEPA FilterChange Calendar ahead 2 years depending on use (use the month wheel on the left and the year wheel on the right) to indicate when filter replacement is necessary (Fig. 2).

Troubleshooting

•Start on highest speed for a few minutes, then adjust to desired speed.

•Check to make sure that the power cord is correctly connected to the outlet.

•Test that the outlet is functioning properly using another appliance or lamp.

•Check the fuse or circuit breaker. The outlet may be overloaded if other appliances are also in use. Determine and correct the cause of the overload.

•If none of the above procedures restore operation, return your unit to the store or if the store's return policy does not allow, return the complete unit per the instructions in the warranty section of this owner's guide. Do not attempt to repair the unit yourself. Doing so may cause damage or personal injury and the warranty does not cover damage resulting from unauthorized attempts to repair or from any use not in accordance with this manual.

Storage

If you store your Honeywell HEPA air cleaner for more than 30 days, we recommend:

•Remove both the primary HEPAfilter and the activated carbon pre-filter from the unit.

•Discard the pre-filter.

•Wrap the HEPA filter in an air-tight plastic bag or plastic wrap. Be sure that the filter is totally sealed.

•To restore the air cleaner to service, unwrap the HEPA filter, install a new activated carbon pre-filter, and replace both filters in the air cleaner.

(See 'How to Change the Filters' section for proper installation.)

Honeywell enviracaire

HEPA Air Cleaner

Honeywell Enviracaire Filters

Model Series 51130

This product has been engineered and crafted with great care for your satisfaction. Be sure to fill out and return the enclosed card within

7 days of purchase.

A.This limited warranty applies to repair or replacement of product found to be defective in material or workmanship within 3 years of the date of purchase. This warranty does not apply to damage resulting from commercial, abusive, unreasonable use or supplemental damage. Defects that are the result

of normal wear and tear will not be considered manufacturing defects under this warranty. HONEYWELL IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE. ANY IMPLIED WARRANTY, INCLUDING MERCHANTABILITY

OR FITNESS FOR A PARTICULAR PURPOSE, ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. Some regions do not allow the

exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you also may have other rights which vary from region to region.

This warranty applies only to the original Purchaser of this product.

B.At its option, Honeywell will repair

or replace this product if it is found to be defective in material or workmanship within the warranty period. Defective

product should be returned to the place of purchase in accordance with store policy or to Honeywell.

Honeywell Enviracaire 13520

C.This warranty does not cover damage resulting from unauthorized attempts to repair or from any use not in accordance with this manual.

D.This warranty DOES NOT cover the pre-filter or the HEPA filter except for material or workmanship defects.

E.Return defective product to the following address with a brief description of the problem. Include proof-of- purchase and a U.S. $10.00/Can $15.00 check or money order for handling, return packing and shipping charges. Please include your name, address and daytime phone number. You must prepay shipping charges. Mark carton

“Attention Repair Department”

Ship to:

Honeywell 11520 Enviracaire Air Purifier

Honeywell Returns Dept. 4755 Southpoint Drive Memphis, TN 38118 U.S.A.

In Canada:

Honeywell Consumer Products Canada

510 Bronte St. South

Milton, Ontario Canada L9T 2X6

If you experience a problem with your air cleaner, please see owner’s guide for instructions. Please do not attempt to repair the air cleaner yourself. Doing so may void the warranty and could cause damage or personal injury. If the problem still persists, please call:

Honeywell

Consumer Relations Dept.

Toll Free 1-800-332-1110.

Mail Questions or Comments to:

Honeywell

Consumer Relations Dept. 250 Turnpike Road Southborough, MA01772 U.S.A.

or e-mail us at: service@honeywell.com.

Honeywell Enviracaire Elite

Honeywell Enviracaire Air Purifier